What is r6 zoning Anchorage AK?

What does r-6 mean?

R-6. Residential Single-Family District (Sec. 35-310.05) Single-family dwelling (detached) with a minimum lot size of 6,000 square feet and a minimum lot width of 50 feet, foster family home, public and private schools.

What is b3 zoning in Anchorage?

The B-3 district is intended for primarily for general commercial uses in commercial centers and area exposed to heavy traffic. These commercial uses are intended to be located on arterials, or within commercial centers of town, and to be provided with adequate public services and facilities.

How is Anchorage divided?

The Municipality of Anchorage is divided into geographic areas called Assembly districts. Direct citizen engagement is also possible through involvement with community councils.

What is r3 zoning?

Residential (R) Zones – R-3

The purpose of the R-3 zone is to allow for row dwellings, while including areas within which row dwellings are mingled with detached dwellings, semi-detached dwellings, and groups of three or more row dwellings. The R-3 zone is intended to permit attached rowhouses on small lots.

What is R6A?

R6A is a medium density residential zoning district. Similar to R6B Zoning, R6A is a contextual district. Contextual Zoning Districts are meant to promote uniformity in the neighborhoods they are zoned in. This results in shorter low rise buildings with large footprints.

IT IS INTERESTING:  What are requirements for divorce in Alaska?

What does R6 zoning mean in NYC?

R6 Zoning in NYC is a residential zoning district with small multifamily apartment buildings and single or two family homes. R6 is medium density non contextual zoning. In R6 you have a choice of Height Factor Zoning or Quality Housing Program.

What do different zoning codes mean?

NSW (New South Wales)

R2 – Low Density Residential. R3 – Medium Density Residential. R4 – High Density Residential. R5 – Large Lot (Rural) Residential.

What does GR2 zoning mean?

GENERAL RESIDENTIAL SUB ZONES. (GR2 – GR6) PRIMARY USES. Dwelling house, Second dwelling, Group housing, Boarding house, Flats, Private road, Open space.

Do you get paid to live in Alaska?

Alaska runs a program called the Alaska Permanent Fund, which, per the state website, allots an equal amount of the state’s oil royalties to every resident through an annual dividend. In 2018, that dividend came out to $1,600 per person.

What are counties called in Alaska?

A: Alaska is not divided into counties but rather into organized and the so-called unorganized borough. Organized boroughs are similar to counties, however, and each of the such units are supervised by a small assembly.

Is Anchorage Alaska Safe?

Alaska’s violent crime rate of 8.85 per 1,000 is the highest in the nation, while its property crime rate is second only to New Mexico’s.

Alaska’s Safest Cities.

City Anchorage
Crime rate per 1,000 62.37
Violent crimes per 1,000 13.10
Property crimes per 1,000 49.28
Law enforcement per 1,000 1.97

What is an R-3 occupancy?

R-3 Residential occupancies where the occupants are primarily permanent in nature and not classified as Group R-1, R-2, R-2.1, R-4 or I, including: Buildings that do not contain more than two dwelling units. Adult care facilities that provide accommodations for six or fewer clients of any age for less than 24 hours.

IT IS INTERESTING:  Quick Answer: How do you become an EMT in Alaska?

What is an R-3 lot?

The Multiple Residential (R-3) Zone is intended to promote the development of grouped housing such as townhouses, condominiums and apartments at a density of up to sixteen (16) dwelling units per gross acre.

Is R3 zoning good?

The R3 Medium Density zone facilitates a more dense urban form than the R2 zone and provides a transition between areas of single dwellings and residential flats. What can I do in the R3 zone? Home occupations are permissible without consent in R3 as long as they meet the requirements in the LEP.